Description
Cast Metal Letters, in ALUMINUM or BRONZE, are individually hand cast in non-polluting electric resistance furnaces at foundries in Decorah, Iowa and Taylor, Texas. Prime aluminum and LEAD FREE bronze ingot are hand poured in virgin sand molds at 1300 degrees F. and 2150 degrees F respectively. Cast Metal Letters offer GREATER dimension than flat cut letters. Typically depths range from ¼" to 1-1/2" depending on the height and style of the letter.

Item#:  CIC01

Description
Flat cut metal letters and logos are available in ALUMINIUM, BRONZE, BRASS, COPPER, STAINLESS STEEL and HOT ROLLED STEEL in many thicknesses and finishes. Pentium powered computers paired with the latest graphics software reproduce your most complex ideas. Your letters and logos are then routed with either cnc MACHINERY or WATERJET CUT. Waterjet cut letters and logos are made using a fine, high pressure stream of water that carries an abrasive mineral. This fine stream cuts and allows for sharp inside corners, intricate detail on logos, and letters under 2" high. Router cut letters and logos are mechanically routed out of flat metal stock. Based on the material thickness and letter size, a 1/8"-1/4" router bit will be used. As a result, inside corners will have a slight radius. Both methods of cutting allow the same surface finishes after being cut

Item#:  CIF01